Look at the thickness: the thickness of the aluminum buckle is not as good as possible. In general, the thickness of the buckle is 0.5mm-0.7mm, and the thickness is particularly 0.8mm or 1mm. The no-name aluminum buckle plate adopts more recycled aluminum with more impurities.
Second, look at the toughness: with the gusset fan, you can also gusset two diagonally placed on the support, the middle pressure heavy test, if the toughness is not good then the gusset will slosh or deformation is very powerful. At the same time, it is necessary to carefully observe whether the thickness of the gusset plate is even.
Third, look at the process: the common surface of the aluminum buckle plate surface technology for the market are mostly covered with film, roller coating, in addition to carving (artistic board), anodizing (oxidation plate). In general, the best choice for the roller coating process, with anti-oil, anti-oxidation, anti-corrosion, no discoloration, no foaming, cost-effective and obvious advantages, the film is covered with a layer of PUC glue film, one is not environmentally friendly (Formaldehyde-containing) Second discoloration is fast (Sun will change color in the sun for two hours). At the same time, we must also pay attention to the back of the processing process, processing process is good long life.
Look at the appearance of the four: from the aesthetic point of view, do not choose the plane of the light of the aluminum gusset, choose a matte point of the shape of the aluminum gusset is better, because the plane of light after the aluminum gusset plate is installed on a large area, as long as there is a little uneven will see very clearly It is not beautiful.
Fifth to see the auxiliary material: the main keel must be thick, this is the most important part of the entire ceiling, it is equivalent to the human body’s bones, must be as thick as possible! The main consideration is the thickness of edge strips and the surface treatment process. Thin strips of material in the hand can be very soft feeling. Surface treatment process Some cheap side strips are affixed with a film, some of the surface will be oxidized, and even the best ribs will not be oxidized on the surface. They will also be shaped, with more color choices and higher prices.
Sixth look at electrical appliances: The electrical appliances in the integrated ceiling industry, just like the automobile industry, rely mainly on assembly. No integrated ceiling company has the ability to produce all its accessories. In addition, the warranty on electrical appliances is also a very important issue. Better merchants can even provide lifetime warranty service.
